Filter
Top Products
CE800B User Manual
22
Administrator Configuration
The configuration settings that the administrator is allowed to make are
explained in the following table:
Setting Function
SET USERNAME AND
PASSWORD
This function is used to set Usernames and Passwords
for the Administrator and Users:
1. One Administrator and four User passwords can be
set.
2. After you select the Administrator field or one of the
User fields, a screen that allows you to key in your
username and password appears. The username and
password may be up to 12 characters long, and can
consist of any combination of letters and numbers.
3. For each individual, key in the Username and
Password, then press [Enter].
To modify or delete a previous Username and/or
Password, use the backspace key to erase individual
letters or numbers.
OSD HOTKEY Selects which Hotkey activates the OSD function:
[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
Since the Ctrl key combination may conflict with
programs running on the computers.
The default is the Scroll Lock combination.
HOTKEY COMMAND
MODE
Enables / Disables the Hotkey Command function. If the
hotkey combinations conflict with programs running on
the computers, you may want to disable hotkey operation
by turning Hotkey Command Mode Off.
The default is On, which allows hotkey operation of the
switch.
HOTKEY Selects which combination activates Hotkey Setting
Mode (HSM):
[Num Lock] + [–] or [Ctrl] + [F12]
The default is [Num Lock] + [–]
See Hotkey Setting Mode, page 25 for further details.
USER AUTHENTICATION If this setting is On, users have to provide a Username
and Password when they plug a flash drive into the USB
port of the Remote unit.
The default is On.