Filter
Top Products
Monitor Configuration 19
For more information consult the HydraVision™ user’s guide included on
the ATI Installation CD-ROM.
Monitor Configuration
Once the drivers and software have been installed, you can configure your
monitor..
To configure your primary display
1 Navigate to the Control Panel and choose Display, or right-click on
the desktop and choose Properties.
2 Choose the Settings tab and select the screen resolution and color
depth that best suit your requirements and your monitor’s
performance.
3 Click Advanced and select the Monitor tab.
4 Choose a refresh rate from the drop-down list.
5 Click OK to return to the desktop.
Reinstalling Drivers
You can install new drivers or reinstall existing drivers if there was a
Windows® conflict.
Reinstall the drivers at any time using the ATISETUP utility located on the
ATI Installation CD-ROM. The ATISETUP utility will start automatically
if you insert the ATI Installation CD-ROM into your optical drive after the
operating system has started.
To manually reinstall drivers
If your CD-ROM auto-run is not enabled and the ATISETUP utility does
not start automatically, follow these steps.
1 In the Windows® task bar, click Start.
2 From the Start menu, select Run.
3 Browse to ATISETUP.EXE on the root directory of the ATI
Installation CD-ROM.
L
Warning - Choosing a refresh rate unsupported by your monitor may
damage your monitor. Consult your monitor’s documentation if
necessary.