Filter
Top Products
6
• The switch(es) allows UDP broadcast messages
to be passed through.
• A router is not placed between the host running
QuickNav and the FastStream VT 5300.
• You have connected the FastStream VT 5300
and the network using at least Cat5e cabling.
• You have noted the FastStream VT 5300 serial
number from the bottom of the unit.
Note
The FastStream VT 5300 is initially configured
with DHCP enabled. It is best if you have
access to a DHCP server.
1 Work from the computer attached to the
FastStream VT 5300 Ethernet port on the same
broadcast domain. From the CD supplied with
your FastStream, run the QuickNav Utility
QuickNAV-windows.exe for Windows or
QuickNAV-Mac for Mac OS X.
2 Locate the FastStream with the serial number
recorded earlier.
3 Highlight the serial number.
4 Click Next.
If a DHCP server is available on your
network, an address is assigned
automatically by the server. Note the
assigned address:
_________________________________
____
If you do not have a DHCP server, get an
IPaddress and subnet mask from your
network administrator, type it into the area
provided, and select Next.
5 Click on Launch Browser
Your browser points to the FastStream VT
5300 splash screen.
Begin initial configuration
1 The FastStream GUI welcome screen
appears. Click on Enter Here
2 Type in the username and password.
Note
The default username is
root;
it is case
insensitive. The default password is
Password
; it is case sensitive. It is best
practice to change the passwords. Refer to
Optional changes to system parameters
on
page 11.
3The Initial Setup page appears.
Before creating a Virtual Tape Library, you may
wish to initialize and verify your drives to ensure
drive integrity. Refer to Initialize and verify
drives on page 17.
CAUTIONCAUTION
Selecting Drive Initialization causes all
previous storage data on the drive to be
erased. Make sure all of your information is
backed up before initializing drives.
4 Go on to Configure Virtual Tape on page 7.
Exhibit 2.0-1 General bracket assembly.