ATTO Technology FastStream VT Computer Hardware User Manual


 
4.0 Modify storage ................................................................................17
Initialize and verify drives
Add drives to a RAID Group
Rebuild RAID Groups
Add or remove Hot Spares
Add a VTL from another FastStream VTL
Delete a VTL
Secure data through Write Protection
Move Virtual Tape Cartridges
5.0 Update storage and firmware ........................................................21
Remove stale VTL configuration data
Update firmware
Preliminary steps
Use FTP over Ethernet
Use the RS-232 serial link
6.0 Interface options .............................................................................23
Use the FastStream VT 5300 GUI
Use the serial port
Use Telnet
Appendix A Cabling ...............................................................................i
SCSI cabling
Cable types
Connecting SCSI devices to SCSI ports
Fibre Channel connections
Appendix B Designing RAID groups ....................................................iii
JBOD (Just a Bunch of Disks)
RAID Level 0
RAID Level 1
RAID Level 10
RAID Level 5
Appendix C CLI provides an ASCII-based interface ...........................v
CLI error messages
CLI summary
CLI command explanations
Appendix D Standards and compliances ............................................xix
FCC Standards: Radio and Television Interference
Canadian Standards
European Standards
Declaration of Conformity
Appendix E Warranty, contact information .........................................xxi
Manufacturer limited warranty
Contact ATTO Technology, Inc.