Avocent 416 Computer Monitor User Manual


 
Chapter 2: Installation 11
Installing an AutoView Switch
Installing your AutoView 424
The diagram below illustrates one possible configuration for your AutoView
424 switch. Follow the step-by-step procedure To install an AutoView 424
switch to properly install your new switch.
Figure 2.2: AutoView 424 Installation Example
WARNING: To reduce the risk of electric shock or damage to your equipment -
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical
outlet or the unit.
TM
KVM
EXTENDER
POWER
Local User
Extended Access User
(Via LongView)
AutoView 424
DB9 Serial Port
for Updating
Firmware
Server 1
Servers 2-18