Filter
Top Products
Chapter 3: Operations 27
-or-
Click the Clear button to remove all servers from the scan list.
2. Click OK.
To start the Scan mode:
1. If the OSCAR interface is not open, press
Print Screen. The Main dialog box will appear.
2. Click Commands. The Commands dialog box displays.
Figure 3.11: Commands Dialog Box
3. Select Scan Enable in the Commands dialog box.
4. Click X to close the Commands dialog box.
NOTE: Scanning will begin when the Main dialog box or flag is displayed. Scanning is inhibited in any other
OSCAR interface dialog box.
To cancel Scan mode:
1. Select a server if the OSCAR interface is open.
-or-
Move the mouse or press any key on the keyboard if the OSCAR interface is not open.
Scanning will stop at the currently selected server.
-or-
Press
Print Screen. The Main dialog box will appear.
2. Click Commands. The Commands dialog box displays.
3. Clear Scan Enable.
Viewing the display configuration
The Display Configuration dialog box allows you to view the current configuration of your
AutoView 2020/2030 switching system.
To view the current configuration:
1. If the OSCAR interface is not open, press
Print Screen. The Main dialog box will appear.