Filter
Top Products
78 CCM840/1640 Installer/User Guide
Syntax
USER ADD <username>
[PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>]
User Add Command Parameters
Parameter Description
<username> 3-16 alphanumeric character username. Usernames are case sensitive.
PASSWORD=<pwd> 3-16 alphanumeric character password. Passwords are case sensitive.
SSHKEY=<keyfi le> Name of uuencoded public key fi le on an FTP server. The maximum
fi le size that can be received is 4K bytes. If this parameter is
specifi ed, you must also specify the FTPIP parameter.
FTPIP=<ftpadd> FTP server’s IP address. If this parameter is specifi ed, you must also
specify the SSHKEY parameter.
KEY=<sshkey> Uuencoded SSH key.
ACCESS=<access> Command and port access rights or level. You may specify multiple
access rights, separated by commas, or a level.
Valid values for access rights are:
P<n> Access to the specifi ed port number.
P<x-y> Access to the specifi ed range of ports.
PALL Access to all ports.
USER User confi guration access rights.
PCON Port confi guration access rights.
SCON Confi guration access rights.
SMON Monitor access rights.
BREAK May issue Port Break command.
Valid values for access levels are:
ADMIN PALL, USER, SMON, PCON and
BREAK access rights.
APPLIANCEADMIN PALL, USER, SCON, SMON,
PCON and BREAK access rights.
Default = PALL,SMON
Examples
The following command adds the username JohnDoe, with the password
secretname, access to ports 2, 5, 6 and 7 and user and monitor access rights.
> user add JohnDoe password=secretname access=P2,5-7,user,smon
The following command adds the username JaneDoe, with access to all ports.
The name of the SSH public user key file is ccm_key2.pub. This file is located
on the FTP server at IP address 10.0.0.3.
> user add JaneDoe ssh=ccm_key2.pub ftp=10.0.0.3 access=pall