Filter
Top Products
AXIS 250S User’s Manual Installing the AXIS 250S
11
❼ Approximately 10-15 seconds after connecting the power supply, the message ‘Reply
from 172.21.1.200...’ - or similar, is returned within the window. Ensure that the
Power Indicator is permanently lit and that the Network Indicator flashes intermittently.
❽ Exit ping. The installation is now complete. You can now access the server directly from
your browser, as described below.
Client System Requirements
Client computers that will be viewing the video stream from the AXIS 250S MPEG-2 Video
Server should meet the following hardware and software requirements:
• Intel Pentium III 500MHz processor, or better
• 128 MB RAM
• AGP Graphics card with 16 MB video memory and support for DirectDraw®
• 32-bit color, if running more than one video stream at a time
• Windows® 2000 or Windows XP
• Internet Explorer 5.5 or higher
• Windows Media Player 7.1 or higher
•DirectX® v 8.1 or higher
Power Indicator
❻Connect the power cable to the unit and
connect it to your main power supply.
Network Indicator
❺ Connect an Ethernet cable to the AXIS
250S and attach it to the network.
Status Indicator