Baracoda BCM 2604 Barcode Reader User Manual


 
3.7.1 Code 93 Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description
(chapt 3.2) for additional information. Minimum and Maximum lengths = 0-80. Minimum Default = 0,
Maximum Default = 80.
Maximum Messa
g
e Len
g
th
3.7.2 Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data received does not
display with the proper characters, it may be because the bar code being scanned was created
using a code page that is different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar codes were created (see Code
Page Mapping of Printed Bar Codes on page A-6), and scan the value and the Save bar code from
the Programming Chart on the inside the back cover of this manual. The data characters should
then appear properly.
Code 93 Code Page
3.8
3.8.1 Code 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description for
additional information. Minimum and Maximum lengths = 1-48. Minimum Default = 4, Maximum
Default = 48.
20
* On
Off
Code 2 of 5
<Default All Code 2 of 5 Settings>
Code 2 of 5
On
* Off