Filter
Top Products
3.16.3 EAN/JAN-8 Addenda Required
When Addenda Required is set to on, the imager will only read EAN/JAN-8 bar codes that have
addenda. Default = Not Required.
3.16.4 EAN/JAN-8 Addenda Separator
When this feature is on, there is a space between the data from the bar code and the data from the
addenda. When turned off, there is no space. Default = On.
3.17 MSI
<Default All MSI Settings>
MSI
3.17.1 MSI Check Character
Different types of check characters are used with MSI bar codes. You can program the imager to
read MSI bar codes with Type 10 check characters.
Default = Validate Type 10, but Don’t Transmit. When Check Character is set to Validate and
Transmit, the imager will only read MSI bar codes printed with the specified type check character,
and will transmit this character at the end of the scanned data.
When Check Character is set to Validate, but Don’t Transmit, the unit will only read MSI bar codes
printed with the specified type check character, but will not transmit the check character with the
scanned data.
Validate Type 10 and Transmit
30
Off
* On