Filter
Top Products
3-50 3-50user's manual R5975236-r3 user's manual R5975236-r3
Chapter 3: Advanced commands
Chapter 3: Advanced commands
Description
Read the lamp run time in hours.
Command
Command[0] \x64
Data
No data bytes.
Return data
The return data-transfer being the lamp run time in hours contains of four data
bytes. The first byte is the most significant byte !
Formula :
Lamp run time (hours)
= Data[0]*256
3
+ Data[1]*256
2
+ Data[2]*256 + Data[3]
Projector type
BD2100, BD2100LC, BD3000, BD3000LC, BD3100, BD3100LC, BD5000,
BD5000LC, BD5100, BD5100LC, BD8000, BD8000LC, BD8100, BD8100LC,
BG8100, BG8100LC
Example
Read the lamp run time of a projector with address \x01.
Suppose the lamp run time is 100 hours.
Transmit
Start \xfe
Projector address \x01
Command[0] \x64
Checksum \x65
Stop \xff
lamp, read run time
lamp, read run time
Description
Read the lamp run time in hours.
Command
Command[0] \x64
Data
No data bytes.
Return data
The return data-transfer being the lamp run time in hours contains of four data
bytes. The first byte is the most significant byte !
Formula :
Lamp run time (hours)
= Data[0]*256
3
+ Data[1]*256
2
+ Data[2]*256 + Data[3]
Projector type
BD2100, BD2100LC, BD3000, BD3000LC, BD3100, BD3100LC, BD5000,
BD5000LC, BD5100, BD5100LC, BD8000, BD8000LC, BD8100, BD8100LC,
BG8100, BG8100LC
Example
Read the lamp run time of a projector with address \x01.
Suppose the lamp run time is 100 hours.
Transmit
Start \xfe
Projector address \x01
Command[0] \x64
Checksum \x65
Stop \xff