Filter
Top Products
1-4 1-4user's manual R5975236-r3 user's manual R5975236-r3
Communication settings summary
Baud rate see baudrate table
Data bits 8
Parity no
Stop bits 1
Baud Rate
Defines the speed of the data transfer.
The baud rate can be set using the dip switches on the processor board of the
projector. Before opening the projector*, insure the projector is powered down
!!!
Check the baud rate table to set up the communication speed.
Consult the owners manual of the projector to change the baud rate setting.
*In some projectors, the Baud Rate must be set using the menu structure (see Owner's manual
of the projector).
Data Bits
Eight data bits are used for each character of the data transfer.
Parity
There is NO parity bit used to perform error checking.
Stop Bits
One stop bit is used to define the end of a character.
Chapter 1: Communications basics
communication settings
Chapter 1: Communications basics
communication settings
Communication settings summary
Baud rate see baudrate table
Data bits 8
Parity no
Stop bits 1
Baud Rate
Defines the speed of the data transfer.
The baud rate can be set using the dip switches on the processor board of the
projector. Before opening the projector*, insure the projector is powered down
!!!
Check the baud rate table to set up the communication speed.
Consult the owners manual of the projector to change the baud rate setting.
*In some projectors, the Baud Rate must be set using the menu structure (see Owner's
manual of the projector).
Data Bits
Eight data bits are used for each character of the data transfer.
Parity
There is NO parity bit used to perform error checking.
Stop Bits
One stop bit is used to define the end of a character.