Filter
Top Products
Source connections
7-4 5975638 BARCOGRAPHICS 1209s 010797
Connecting a RGB Analog source with Tri-
level sync to Port 4/5 (option)
RGB analog input terminals with Tri-level sync input or with Tri-level
sync on green can be connected to the projector via Port 4/5. The
projector detects automatically where the sync signal is located. This
feature requires an optional Tri-Level Sync Module - Order No.
R9828040.
To select the input :
Peripheral equipment
Connecting a RCVDS 05 source selector to the
projector.
* Up to 20 inputs with a RCVDS05 and up to 90 inputs can be
accommodated when multiple RCVDS source selectors are linked
via a Expansion Module.
* Serial communication with the projector.
* Remote control buttons on the RCVDS05 to control the projector
(source selection and analog settings).
* The selected source number will be displayed on a 2-digit display
and the selected input modules will be indicated with a LED on the
rear.
The order numbers for the RCVDS05 source selector :
RCVDS05 230 V R9827880
RCVDS05 120 V R9827889
For more information about the use of the RCVDS05, consult the
RCVDS05 Owner's Manual - order number : R5975765.
Connecting a VS05 source selector to the projector.
The VS05 can switch up to 5 Composite Video sources, 3 S-Video
Sources and 1 RGB analog or component Video source to the
projector. In addition, the audio signal associated with the source, can
be switched to an audio amplifier.
VS05 order no. : R9827890.
For more information about the use of the VS05, consult the VS05
Owner's Manual - order number : R5975245.
Connecting an IR Remote Receiver 800 to the projector
This infra-red Remote Receiver makes it possible to control the
projector from another room. There is a communication cable be-
tween the IR Remote Receiver and the projector. The control
information from the RCU can now be sent to the IR Remote Receiver
800. The IR Remote Receiver 800 displays the selected source on a
7-segment display.
IR Remote Receiver 800 order number : R9827515.
Press the digit button 7 on the RCU or the local keypad.
Connecting a Component Video source with
Tri-level sync to Port 4/5 (option)
Component video inputs with Tri-level sync signal can be connected
to the projector via Port 4/5. The projector detects automatically
where the sync signal is located. This feature requires an optional
Tri-Level Sync Module - Order No. R9828040.
To select the input :
Press the digit button 8 on the RCU or the local keypad.
359
VCR HDTV player
Audio amplifier