Filter
Top Products
9. NetSetup now needs to know if you want to create a client setup
floppy disk. If you have more computers than you need to setup to
work with the Router, click "Yes". This will save some files to the
disk that your other computers can use to make setup easier. If you
are not going to setup any more computers, click "No" and skip to
step 11.
10. If you clicked "Yes", you will be prompted to insert a floppy disk
into the PC’s floppy disk drive. Label a floppy disk "Belkin
Networking" and insert it into the floppy disk drive. Click "OK".
11.After the client setup disk has been created, you will be prompted
to restart your computer. Restart your computer.
Configuring Additional Computers Using Belkin NetSetup Software
Now that the first computer has been configured we are ready to
configure the other PCs on your network.
1. You should now be working with the next computer. Click Start,
Programs, Belkin SOHO Networking, and then Belkin NetSetup to
launch the easy-to-use computer configurator the following screen
will appear:
2. Select "I am adding this computer to my network". Click Next.
Step 3
18