Filter
Top Products
Product Descriptions
Front Panel
Power LED–When lit, this light indicates that the unit is
receiving power
WAN Link Status
• GREEN - indicates that there is an active connection with the
Cable or DSL modem. If this light is off, the link is not established.
• FLASHING GREEN – When the WAN link status light is flashing
green, data is flowing between the Router and the Cable or
DSL modem.
Port Activity/Status Lights
• AMBER-Solid amber indicates that there is a 100Mbps
(100Base-TX) link between the Router and the computer
connected to that port.
• GREEN-Solid green indicates that there is a 10Mbps (10Base-TX)
link between the Router and the computer connected to that port.
• FLASHING–When a port status light is flashing either amber or
green, data is flowing between the Router and the computer
connected to that port.
Rear Panel
Power Input Jack–Connect the DC power supply
WAN Port–Connect the network cable from the Cable or DSL modem
to the WAN port
LAN Ports–Numbered 1 – 4. Connect the network cable from your
PCs to these ports. Note: they do not need to be connected
sequentially. For example, in a two-computer network you can
connect one computer to Port 4 and another to Port 1.
Reset Button–If the Router stops functioning properly, you can power
off and on the Router, without losing your settings. Press and hold the
RESET button for 2 seconds. The power light will begin blinking and
the port lights may blink. When the lights stop blinking, the Gateway
Router has been reset.
4