Filter
Top Products
Belkin Docking Options
5
The Belkin Docking Ring
Belkin has designed the Router to link together with other Belkin
networking products through the unique docking ring on the side of
module. It will fit into the mating ring of another Belkin network
product such as the 5- or 8-Port Switch. Simply place the modules
side by side and push them together.
Wall Mounting the Belkin Gateway Router
Belkin provides an adapter that will allow the unit to be mounted to
the wall. The adapter is available at belkin.com
. To install the wall
mount follow these steps.
1. Use the wall mount as a template and mark the screw holes on
your wall with a pencil.
2. Drill holes in the wall and insert screw anchors (not included) into
the wall.
3. Insert screws into the anchors and turn them in just far enough so
when the wall mount is placed on the screws that it is snug but
still able to slide.
4. Snap the wall mount into the docking ring on the Router.
5. Line up the wall mount’s holes with the screw heads and push the
wall mount over them. Slide the Router and wall mount down
over the screw heads to secure it to the wall.