Filter
Top Products
39
Troubleshooting
I cannot access the web-based
Router setup utility when typing
the correct address: 192.168.2.1
1. Accessing the Router setup
utility can take up to 15
seconds. Be sure that you
wait long enough.
2. Check the connection
between the PC and the
Router making sure that the
network cable is connected
to any port labeled LAN.
3. Check the LAN link light on
the front of the Router. The
light that corresponds to the
port that the computer is
connected to should be
illuminated. If it is not, check
your connection or network
interface card.
4. Open the IP configuration
panel (described earlier in this
manual). Select your adapter
and press "Release". After the
IP address has been released,
click "Renew". Your computer
should obtain an IP address
from the Router.
5. Reset the Router and begin
again perform the above
step again.
Problem Possible Cause/Solution