Filter
Top Products
CONNECTING AND CONFIGURING YOUR ROUTER
4.4 When configuration is complete, the Wizard will tell you “Router Setup
Complete” and it will move to the next step.
4.5 Checking Internet
The Wizard will now check for an Internet connection. This can take a few
minutes. The Wizard may not detect a connection right away. If not, it will retry
a number of times. The “Connected” light on the front panel of the Router will
flash during this time. Please be patient through this process. If at the end of
this process the Wizard cannot connect to the Internet, use the Troubleshooting
button or refer to the Troubleshooting section of this guide to obtain help about
how to correct the problem.
20 21
4.6 Finished
When the Internet connection is complete, the Wizard will tell you that you are
finished. The “Connected” LED on the front of the Router will be solid GREEN,
indicating that the Router is now connected to the Internet.
Your Router is now connected to the Internet. Now you can begin surfing the
Internet by opening your browser and going to your favorite web page.
Congratulations! You have finished installing your new Belkin Router. You are
ready to set up the other computers in your home. You can also add computers
to your Router any time you want. Simply follow step 5 on the next page to
learn how to add more computers.
CONNECTING AND CONFIGURING YOUR ROUTER