Filter
Top Products
23
23
In the boxes below, make up your key by writing in two characters
between A–F and 0–9 in each box. You will use this key to program
the encryption settings on your Wirelesss Router (or Access Point)
and your wireless computers.
Setting Up your Belkin Wireless Router or Access Point
to Use Security
To start using security, you need to first enable WEP or WPA for your
wireless router or access point. For Belkin Wireless Routers or Access
Points, these security features can be configured by using the web-
based interface. (See your wireless router or access point manual for
directions on how to access the management interface.)
Changing the Wireless Security Settings
The Belkin Wireless G Router and Range Extender/Access Point are
equipped with the latest WPA security feature. They also support the
legacy WEP security standard. By default, wireless security
is disabled.
To enable security, you will need to determine which standard you
want to use (see page 19). To access the security settings, click
“Security” on the wireless section using the web-based interface. (See
your wireless router or access point manual for directions on how to
access the security settings.)
Using the Belkin Wireless LAN Utility
1
2
3
4
5
6
section