Filter
Top Products
39
39
3. The exact window that opens will vary depending on the model
of wireless card you have; however, any of the utilities should
have a list of “Available Networks”. Available networks are
wireless networks you can connect to.
If you are using a Belkin 802.11g (125HSM) Router, “Belkin54g” is
the default name.
If you are using a Belkin 802.11g (54g) router, “Belkin54g” is the
default name.
If you are using a Belkin 802.11b router, the default name should
be “WLAN”.
If using a non-Belkin router, please consult your router
manufacturers user manual for the default name.
The name of your wireless network appears in
“Available Networks”
If the correct network name is listed in the “Available Networks”
list, please follow the steps below to connect wirelessly:
1. Click on the correct network name in the “Available Networks” list.
2. If the network has security (encryption) enabled, you will
need to enter the network key. Click “Connect”. For more
information regarding security, see the page entitled: “Securing
your Wi-Fi Network” on pg.19 of the user manual.
3. Within a few seconds, the tray icon in the lower right-hand
corner of your screen should turn green, indicating a
successful connection to the network.
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support.
Troubleshooting
1
2
3
4
5
6
section