Filter
Top Products
Operation 33
1. Picture menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Application
Mode
(PC: Presentation;
YPbPr/ S-Video/
Video: Movie)
Pre-defined application modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting an
application mode" on page 26 for details.
Auto
Keystone
(On)
If this function is set to On, the projector will detect the tilt angle and
correct keystoning automatically. You will not need to manually correct
the image shape.
Keystone (0)
Corrects any keystoning of the image. See "Correcting keystone" on page
25 for details.
Color Temp
(depends on the
selected
Application mode)
There are four color temperature settings available. See "3. Selecting a
color temperature" on page 27 for details.
Brightness
(depends on the
selected input
source)
Adjusts the brightness of the image. See "1. Adjusting brightness" on
page 27 for details.
Contrast
(depends on the
selected input
source)
Adjusts the degree of difference between dark and light in the image. See
"2. Adjusting contrast" on page 27 for details.
Color (depends
on the selected
input source)
Increases or decreases the color intensity of the image.
Tint (50)
Adjusts the color tones of the image. The higher the value, the more
reddish the image becomes. The lower the value, the more greenish the
image becomes.
When a Video or S-Video signal is connected, the function is only
available with NTSC system selected.