Filter
Top Products
Maintenance42
Temperature information
When the Temperature warning light is on, it is warning you of the following possible
problems.
1. The internal temperature is too high.
2. The fans are not working.
Turn the projector off and contact qualified service personnel for further help. For more
detailed information, please refer to "Indicators" on page 42.
Indicators
Illustration
• Blank - : Light OFF
•
O : Orange light
• : Light flashing
• R : Red light
• : Light ON
• G : Green light
Light Status & Description
Power Temp Lamp
Power events
--
Stand-by mode.
--
The Power indicator light is flashing during powering up.
--
The projector is under normal operation.
--
1. The projector needs 90 seconds to cool down as it was
abnormally shut down without the normal cooling down
process. Or
2. The projector needs to cool for 90 seconds after the
power is turned off.
--
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
O
G
G
O
O