Filter
Top Products
Introduction10
Remote control
1. Power (Refer to "Start up" on page 23
and "Shutting down the projector" on
page 34 for more information.)
Turns the projector on or off.
2. Freeze
Freezes the projected image. An icon
" " will display in the lower right
corner of the screen. To release the
function, press Freeze again.
3. 5Up, 6 Down
4. 3Left, Right4
When the on-screen menu is activated,
the 5Up, 6 Down, 3Left and
Right4buttons are used as directional
arrows to select the desired menu items
and to make adjustments.
5. Menu (Refer to "Using the menus" on
page 36 for more information.)
Displays or hides the On-Screen Display
(OSD) menu system.
6. Keystone (Refer to page
"Correcting keystone" on page 27 for
more information.)
Manually corrects distorted images
resulting from an angled projection.
7. Timer On/Show (Refer to "Setting the
presentation timer" on page 33 for more
information.)
A multifunctional key that activates,
displays or hides on-screen timer based
on your own timer setting.
8. Timer Setup (Refer to "Setting the
presentation timer" on page 33 for more
information.)
Enters presentation timer setting directly.
9. Auto (Refer to "Auto-adjusting the
image" on page 27 for more
information.)
Automatically determines the best
picture settings for the displayed image.
10. Source (Refer to "Switching input signal"
on page 26 for more information.)
Sequentially selects the input signal RGB,
Component Video,
S-Video or Video.
11. Blank (Refer to "Hiding the image" on
page 30 for more information.)
Used to hide the screen image. Press any
key on the remote control to restore the
image.
12. Mode (Refer to "Selecting a picture
mode" on page 29 for more information.)
Sequentially selects a predefined picture
setting available for each input.
1
2
3
4
5
3
6
7
8
9
10
11
12