Filter
Top Products
Maintenance 47
3. Remove the lamp cover from the projector.
Do not turn the power on with the lamp cover
removed.
4. Remove the lamp cords from the slots.
5. Disconnect the lamp connector by pushing it
against the projector while pulling it up.
6. Loosen the screw that secures the lamp.
7. Lift the handle so that it stands up. Use the
handle to slowly pull the lamp out of the
projector.
• Pulling it too quickly may cause the lamp to
break and scatter broken glass in the projector.
• Do not place the lamp in locations where water
might splash on it, children can reach it, or
near flammable materials.
• Do not insert your hands into the projector
after the lamp is removed. If you touch the
optical components inside, it could cause color
unevenness and distortion of the projected
images.
8. As shown in the figure, lower the new lamp
first and align the two holes on the lamp with
the locators on the projector.