Filter
Top Products
Operation20
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, you can perform the following steps.
1. Adjust the height of the projector.
2. Press Keystone on the remote control or
Auto on the projector.
If the image is still distorted, you will need to manually
correct it following ONE of these steps.
• Press 3 Left/ Right 4 (hot key) on the control
panel of the projector to display the status bar
labelled Keystone. Press 3 Left to correct
keystoning at the top of the image. Press Right 4 to correct keystoning at the bottom
of the image.
• Press / on the remote control to display the status bar labelled Keystone, then
press to correct keystoning at the top of the image or press to correct
keystoning at the bottom of the image.
• Press Menu key on the projector or the remote control. Go to
Picture -->
Keystone and adjust the values by pressing 3 Left/ Right 4 on the projector or 3 / 4
on the remote control.
For example,
Left
Right
UpDown
AUTO
0
Keystone
-6
Keystone
0
Keystone
+6
Keystone
1. Press 3 Left on the projector or
2. Press on the remote control or
3. Press 3 Left on the projector or 3 on the
remote control when you are in Picture -->
Keystone menu.
1. Press Right 4 on the projector or
2. Press on the remote control or
3. Press Right
4 on the projector or 4 on
the remote control when you are in Picture -
-> Keystone menu.