Filter
Top Products
Introduction12
Remote control
1. ON
Turns on the projector. See "Starting up the
projector" on page 22 for details.
2. COMPUTER
Displays RGB (PC)/Component video
(YPbPr/ YCbCr) signal.
3. HDMI
Displays HDMI signal.
4. S-VIDEO
Displays S-video signal.
5. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See "Using
the menus" on page 25 for details.
6. BLANK
Used to hide the screen picture. See "Hiding
the image" on page 34 for details.
7. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 24 for
details.
8. MODE/ENTER
Selects an available picture setup
mode. See "Selecting a picture mode" on
page 31 for details.
Activates the selected On-Screen
Display (OSD) menu item. See "Using
the menus" on page 25 for details.
9. ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size. See "Magnifying and
searching for details" on page 29 for
details.
10.
Page Up/Down
Page up/down arrows when connected
through USB to a PC. See "Remote
paging operations" on page 34 for details.
11. FREEZE
Freezes the projected image. See
"Freezing the image" on page 34 for
details.
12. Network Setting
Enables Network Settings OSD menu.
13. TEST
Displays the test pattern. See "Test
Pattern" on page 70 for details.
14. OFF
Turns off the projector. See "Shutting
down the projector" on page 38 for
details.
15. VIDEO
Displays vidoe signal.
16. NETWORK
Enables the network mode.
17. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 28 for
details.
1
19
7
8
7
21
17
5
18
24
22
20
15
2
4
6
10
11
25
12
13
14
16
23
3
9
19