BenQ SH910 Projector User Manual


 
Operation 51
ii. You can select to stop/start displaying desktop contents to connected network
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click
the location you want to display. 4locations can be chosen (1-4) or 2 places (L and
R) if it’s 2 computers. Once you click the place you want to display, the image
appers on th eprojector. You can change th elocation anytime you want, even back
to full screen or blank out.
The Basic and Advanced Settings pages allow you to configure the Q Presenter.
i. You can select whether to activate Remote Desktop function. If the Remote
Desktop function is activated, you can change the Name and Password. If it isn’t
activated, the Name and Password will be gray out.
ii. You can set the name and password of the connected computer. The Name must
be eight capital letters from A-Z & 0-9. The Password must be 6 digits from 1 to 4.
iii. When you install the Q Presenter, the program will automatically identify the
language of your computer’s operating system and install the same language as
your operating system. If your language isn’t included, the system will keep
English as the default setting.
iv. You can select whether to allow notification message popup.
v. Once you set to activate 1:N display, 1PC/NB can display up to 8 projectors at the
same time.
vi. Once set, press Apply to save the changes.
i
v
ii
iii
iv
vi