Filter
Top Products
54
Additional information
English
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
1. After the start-up logo, press MENU on the projector or MENU/EXIT
on the remote control, and then press / until the Advanced Setup
menu is highlighted.
2. Press to highlight Lamp Settings and press ENTER. The Lamp
Settings page is displayed.
3. Highlight Reset Lamp Timer and press ENTER. A warning message is
displayed asking if you want to reset the lamp timer. Highlight Reset
and press ENTER. The lamp time will be reset to "0".
Lamp Settings
High Altitude Mode
Password
Reset All Settings
Advanced Setup
EXIT BackS-Video
ENTER
Off
Lamp Settings
Lamp Power
Equivalent Lamp Hour
ENTER
EXIT Back
Reset Lamp Timer
Reset Lamp Timer?
Reset Cancel
WARNING
Normal
Expert Mode
Baud Rate
115200
HDMI Settings
Test Pattern
Audio Settings
Lan Control Settings
Direct Power On
Off