Filter
Top Products
34
Using the projector
English
Turning the power off
To turn the projector off, press POWER ( ) on the projector or remote
control and a warning message appears. Press POWER again.
• The Power indicator light flashes orange and the fans run for about
two minutes to cool the lamp. The projector will not respond to any
commands until the cooling process is complete.
• Then, the Power indicator light is a steady orange once the cooling
process has finished and fans stop.
• If the projector will not be used for an extended period, turn the
main power switch off and unplug the power cable from the power
outlet.
• To protect the lamp, the projector will not respond to any
commands during the cooling process.
Press again to power off.
Power Off
Press any other button to cancel
W20000-en.book Page 34 Monday, October 22, 2007 3:35 PM