BenQ W20000 Projector User Manual


 
36
Using the projector
English
Note that the menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
The default values listed in this manual, especially on pages 37-39, are for reference only. They may vary from the
projectors due to the continuous improvement to the products.
System Setup
Language
Splash Screen BenQ/Blue/My Screen
My Screen
Projector Position
Floor Front/Ceiling Front/Floor Rear/Ceiling
Rear
Auto Off
Disable/5 min/10 min/15 min/20 min/25 min/30
min
Sleep Timer
Disable/30 min/60 min/90 min/120 min/150
min/180 min
Background Color Purple/Black/Blue
Menu Settings
Menu Display Time 5 sec/10 sec/15 sec/20 sec/25 sec/30 sec
Menu Position
Center/Top-Left/Top-Right/Bottom-Right/
Bottom-Left
Input Source
HDMI 1/HDMI 2/Video/S-Video/Component 1/
Component 2/RGB HD
Auto Source Search On/Off
Advanced
Setup
Lamp
Lamp Power Normal/Whisper
Lamp Hours (shows lamp hours information)
Reset Lamp Timer
Pattern
Grid
Color Bar
Dust Filter
Dust Filter Hours (shows lamp hours information)
Reset Dust Filter Timer
High Altitude Mode On/Off
Password
Password On/Off
Change Password (inputs current password)
Key Lock
Reset All Settings
ISF (inputs current password)
Information
Source
Picture Mode
Resolution
Lamp Hours
Normal
Whisper
Total
Dust Filter Hours
W20000-en.book Page 36 Monday, October 22, 2007 3:35 PM