Billion Electric Company BiGuard 2 Switch User Manual


 
113
Management IP Address: You may specify an IP address allowed to logon and access
the router’s web server. Setting the IP address to 0.0.0.0 will disable IP address
restrictions, allowing users to login from any IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user’s
configuration session.
Example: User A changes HTTP port number to 100, specifies their own IP address
of 192.168.1.100 and sets the logout time to be 100 seconds. The router will only
allow User A access from the IP address 192.168.1.100 to logon to the Web GUI by
typing: http://192.168.1.254:100 in their web browser. After 100 seconds, the
device will automatically logout User A.
SNMP Access Control
SNMP Function: Select Enable to activate this function, Disable to deactivate this
function.
SNMP V1 and V2
Read Community: Input the string for Read community to match your SNMP
software.
Write Community: Input the string for Write community to match your SNMP
software.
Trap Community: Input the string for Trap community to match your SNMP
software.
IP Address: Input the device IP address with SNMP software installed.
SNMP V3
Username: Input the Username for your SNMP software.
Password: Input the Password for your SNMP software.
Access Right: Select Read to allow your SNMP software to read the information.
Select Read/Write to allow your SNMP software to read and write the information.
4.4.8.4 IGMP
IGMP snooping and IGMP proxy are functions to be used for home users who will
access IPTV applications.