Filter
Top Products
78
Time, please check the Automatic checkbox.
Resync Period: Please input the resync circle of time zone update.
Click Apply to apply the rule, Click Cancel to discard the changes.
4.4.3.2 Remote Access
To allow remote users to configure and manage BiGuard 2/10 through the Internet,
select the Enable radio button. To deactivate remote access, select the Disable
radio button. This function also enables you grant access from any PC or from a
specific IP address. Click Apply to save your settings.
NOTE: When enabling remote access, be sure to change the default administration
password to something more secure.
Action: Select Enable or Disable remote access function.
HTTPS Port: Please input the remote access HTTPS port you would like to
use.(default is 443)
Click Apply to apply your settings.
Click Create to add a Remote Access Table to specify the allowed remote access
addresses.