Billion Electric Company BiGuard 2 Switch User Manual


 
13
1.3.1.3 Rack Mounting
To rack mount BiGuard 10, carefully secure the device to your rack on both sides
using the included brackets and screws. See the diagram below for a more detailed
explanation.
1.3.1.4 Cabling
Most Ethernet networks currently use unshielded twisted pair (UTP) cabling. The
UTP cable contains eight conductors, arranged in four twisted pairs, and terminated
with an RJ45 type connector.
One of the most common causes of networking problems is bad cabling. Make sure
that all connected devices are turned on. On the front panel of BiGuard 10, verify
that the LAN link and WAN line LEDs are lit. If they are not, check to see that you are
using the proper cabling.
1.3.2 BiGuard 2
BiGuard 2 iBusiness Security Gateway Home-Office
Getting Started CD-ROM
Quick Start Guide
Ethernet (CAT-5 LAN) Cable
AC-DC Power Adapter (12VDC, 1A)