Filter
Top Products
139
firewall adds features that deal with outside Internet intrusion and attacks. When an
attack or intrusion is detected, the firewall can be configured to log the intrusion
attempt, and can also notify the administrator of the incident. With this information,
the administrator can work with the ISP to take action against the hacker. Against
some types of attacks, the firewall can discard intruder packets, thereby fending off
the hacker from the private network.
D.3.1.1 Stateful Packet Inspection
BiGuard 2/10 uses Stateful Packet Inspection (SPI) to protect your network from
intrusions and attacks. Unlike less sophisticated Internet sharing routers, SPI
ensures secure firewall filtering by intercepting incoming packets at the network
layer, and analyzing them for state-related information that is associated with all
network connections. User-level applications such as Web browsers and FTP can
make complex network traffic patterns, which BiGuard 2/10 analyzes by looking at
groups of connection states.
All state information is stored in a central cache. Traffic passing through the firewall
is analyzed against these states, and then is either allowed to pass through or
rejected.
D.3.1.2 Denial of Service (DoS) Attack
A hacker may be able to prevent your network from operating or communicating by
launching a Denial of Service (DoS) attack. The method used for such an attack can
be as simple as merely flooding your site with more requests than it can handle. A
more sophisticated attack may attempt to exploit some weakness in the operating
system used by your router or gateway. Some operating systems can be disrupted
by simply sending a packet with incorrect length information.
D.3.2 Why Use a Firewall?
With a LAN connected to the Internet through a router, there is a chance for hackers
to access or disrupt your network. A simple NAT router provides a basic level of
protection by shielding your network from the outside Internet. Still, there are ways
for more dedicated hackers to either obtain information about your network or
disrupt your network’s Internet access. Your BiGuard 2/10 provides an extra level of
protection from such attacks with its built-in firewall.