Filter
Top Products
Bizfon Manual I: Installation Guide Step 1: Installing the Bizfon
Please Note: The Admin PC is connected to the Bizfon LAN port to access the Web Man-
agement of the Bizfon. After the initial configuration has been completed, this PC can then
be moved to the LAN and connect to the Bizfon over a switch (see Fig.I-7). You also may
reach the Bizfon for its first configuration from an Admin PC within the LAN, but this may
cause collisions in case of non-fitting IP addresses and competing DHCP servers.
Fig. I-5: Configuration: Bizfon used as Internet Access Router with a switch connected to the LAN port
If the user already operates a router connected to the cable or DSL modem and has de-
vices behind the router, the router is disconnected from the modem and the Bizfon is in-
serted between the modem and the router (see Fig.I-8). The Bizfon serves as an Internet
access router and DHCP server. The Bizfon will be configured to connect directly to the
Internet through a cable or DSL modem. The router then is connected to the Bizfon LAN
port.
Fig. I-6: Configuration: Bizfon used as Internet Access Router with a router connected to the LAN port
Please Note: If there are services configured behind the existing router such as Web or
gaming servers, these services also must be configured through the Bizfon firewall for
proper operation. Refer to the Administrator’s Guide for more information.
Bizfon2000 and Bizfon4000 (SW Version 3.1.x) 12