Filter
Top Products
Bizfon Manual I: Installation Guide Requirements
Requirements
• One 120/240 VAC power outlet in close proximity to the Bizfon.
• One RJ45 Ethernet 10/100 broadband Internet connection.
• At least one RJ11 telephone connection is recommended to connect the Bizfon to the
PSTN network (all Bizfon IP PBXs with FXO ports).
• At least one off-the-shelf analog phone with an RJ11 telephone cable.
• One CAT 5 Ethernet cable with an RJ45 connector to connect to the Bizfon LAN port.
apter installed.
• 5 or higher, or Netscape Navigator 4.7 or
e added according to the different connectivity requirements of the Bizfon IP
PBX types.
• One PC with a 10/100 Mbps Ethernet card or ad
• TCP/IP network protocol installed on each PC.
For optimal results, Internet Explorer 5.
higher are recommended.
Please Note: All Bizfon IP PBXs are shipped with one RJ11 cable and one straight RJ45
CAT 5 cable. If the LAN connector of the Bizfon connects to a hub or switch, a crossover
cable may be required.
Other cables ar
Bizfon2000 and Bizfon4000 (SW Version 3.1.x) 6