Filter
Top Products
Bizfon Manual I: Installation Guide
Bizfon2000 and Bizfon4000; (SW Version 3.1.x)
Copyright and Trademarks
Copyright © 2003-2006. All Rights Reserved. Bizfon2000 and Bizfon4000 are registered trademarks of Bizfon, Inc. Micro-
soft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand
names are the property of their respective proprietors.
Limited Warranty
Bizfon Inc. (‘Bizfon) warrants to the original end-user purchaser every Bizfon to be free from physical defects in material
and workmanship under normal use for a period of one (1) year from the date of purchase (proof of purchase required). If
Bizfon receives notice of such defects, Bizfon will, at its discretion, either repair or replace products that prove to be defec-
tive.
This warranty shall not apply to defects caused by (i) failure to follow Bizfon’s installation, operation or maintenance in-
structions; (ii) external power sources such as a power line, telephone line, or connected equipment; (iii) products that
have been serviced or modified by a party other than Bizfon or an authorized Bizfon service center; (iv) products that have
had their original manufacturer’s serial numbers altered, defaced, or deleted.
In no event shall Bizfon’s liability exceed the price paid for the product from direct, indirect, special, incidental, or conse-
quential damages resulting from the use of the product, its accompanying software, or its documentation. Bizfon offers no
refunds for its products. Bizfon makes no warranty or representation, expressed, implied, or statutory, with respect to its
products or the contents or use of this documentation and all accompanying software, and specifically disclaims its qual-
ity, performance, merchantability, or fitness for any particular purpose.
Return Policy
If the product proves to be defective during this warranty period, call Bizfon Customer Care at (877) 603-4100 to obtain a
Return Material Authorization (RMA) Number. Please have your proof of purchase on hand when contacting us. When
returning a product, mark the Return Authorization Number clearly on the outside of the package and include your original
proof of purchase. Return requests cannot be processed without proof of purchase. Customers are responsible for ship-
ping and handling charges when shipping to Bizfon.
Bizfon or its service center will use commercially reasonable efforts to ship a replacement product within ten (10) working
days after receipt of the returned product. Actual delivery times may vary depending on customer location.
Bizfon reserves the right to revise or update its products, pricing, software, or documentation without obligation to notify
any individual or entity. Please direct all inquiries to:
Bizfon Inc., 50 Stiles Road, Salem, NH 03079
Notice to Users
This Installation Guide, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form
without prior written approval.
Bizfon provides no warranty with regard to this Installation Guide or other information contained herein and hereby ex-
pressly disclaims any implied warranties of merchantability or fitness for any particular purpose in regard to this manual or
other such information. In no event shall Bizfon be liable for any incidental, consequential, or special damages, whether
based on tort, contract, or otherwise, arising out of or in connection with this manual or other information contained herein
or the use thereof.
FCC Statement (Part 15) Class B
The Bizfon2000 and Bizfon4000 have been tested and found to comply with the limits for a class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the device.
• Connect the equipment to an outlet on a different circuit from the receiver.
• Consult a dealer or an experienced Radio/TV technician for assistance.
You are cautioned that any change or modification to the equipment not expressly approved by the manufacturer could
manufacturer could
ack of this
d to the telephone company.
void the user’s authority to operate this device.
FCC Statement (Part 15) Class A
You are cautioned that any change or modification to the equipment not expressly approved by the
void the user’s authority to operate this device.
Administrative Council for Terminal Attachments (ACTA) Customer Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the b
equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ###TXXXX,
made out to HX7OT00BHX70100. If requested, this number must be provide
Any plug or jack that is used to connect this equipment to the premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted by the ATCA.
The Ringer Equivalence Number is an indicator of the maximum number of devices allowed for connection to a telephone
interface. The termination on an interface may consist of any combination of devices subject only to the requirements that
the sum of the RENs of all the devices does not exceed five. Excessive RENs on a telephone line may result in the de-
vices not ringing in response to an incoming line. The REN for this product is part of the product identifier that has the
format US:AAAEQ###TXXX, made out to HX7OT00BHX70100. The digits represented by ### are the REN without a
decimal point (in this case 00B is a REN of 0.0B.)