Filter
Top Products
Installation
40 ETEP Installation Guide
The steps to perform for a typical installation are listed below.
Cabling Requirements: ET1000A
Table 16 outlines the standard cables used with each port on the ET1000A. The connector type listed
indicates only what is required to connect to the ET1000A port, and may or may not be the same
connector type required for the other end of the cable. Some cables are supplied by Black Box and others
are user-supplied.
Table 15 ET1000A Installation Steps
Step Action to Perform Description
1 Review the cabling requirements. on page 40
1 Unpack the shipping package. on page 41
2 Prepare a space for installation of the ET1000A. on page 41
3 Connect the cables. on page 42
4 Apply power to the ET1000A. on page 43
Table 16 ET1000A Standard Cables
ET1000A Port Cabling Supplied by...
Power receptacles Power supply cables certified
and approved for use in the
country of interest
Black Box
RS-232 Port Shielded copper null modem
cable, RS-232 DB9 connector
(female to male)
Black Box
Ethernet Management Port
(RJ-45)
Shielded Category 5 straight
through cable (STP), RJ-45
connector
a
a. The 10/100 Ethernet management port is auto-sensing for polarity. You can use a shielded Category 5 straight
through cable or a shielded crossover cable when connecting to this port.
Black Box
Ethernet Management port
(SFP)
Not applicable. Port is not
enabled in this release.
Not applicable
Local and Remote Gigabit
Ethernet ports
• Optical SFP transceivers
• 1000Base-LX SFPs
9/125μm single-mode duplex
fiber or simplex fiber pair (1
transmit, 1 receive), 1310 nm
nominal wavelength, LC
connector
OR
• 1000Base-SX SFPs
62.5/125μm multi-mode
duplex fiber or simplex fiber
pair (1 transmit, 1 receive),
850nm nominal wavelength,
LC connector
Available as accessory options
Local and Remote Gigabit
Ethernet ports
• Copper SFP transceivers
Shielded Category 5 straight
through cable (STP), RJ-45
connector
Available as accessory options
Aux1 port (SFP) Not applicable. Port is not
enabled in this release.
Not applicable