Filter
Top Products
ServSwitch™ Wizard DP USB
724-746-5500 | blackbox.com
Page 28
5.1.3 Selecting a computer using the mouse buttons
Using the mouse buttons, you can quickly switch the keyboard, mouse, video monitor(s), speakers and/or USB peripherals to any
computer channel.
Note: These procedures work only with three-button or IntelliMouse devices and only if the ‘Mouse Switching’ option has been
enabled.
5.1.3.1 To select a computer using the mouse buttons
1 Hold down the middle button (or scroll wheel) of the mouse.
2 Click the left mouse button to increment the channel number or click the right mouse button to decrement the channel. When
the correct channel is reached, release the middle button.
When using this method of switching:
• The computer channels that are visited depend upon the configuration menu setting (see 5.1.3.2).
• The ports (KVM, audio and/or USB) that are switched using this method depend upon the switching mode that is currently
set using the front panel buttons.
5.1.3.2 Choosing which computers are accessed when using mouse buttons
The computer channels that are visited when you use the mouse buttons (or hotkeys + tab/autoscan) are determined by a setting
within the Configuration menu:
1 Enter the Configuration menu.
2 Press and then press either:
to choose Cycle all ports, or
to choose Cycle only active ports
3 Press to accept the setting and return to the main menu section.
4 Press and then to exit the menu and save changes.