Filter
Top Products
724-746-5500 | blackbox.com
Page 19
2.6 ETHERNET MANAGEMENT PORT
The LB510A-R2 offers a 10/100 Ethernet port for configuration and management via
Telnet sessions. Because the Ethernet port is configured as MDI, a crossover Ethernet
cable is required when connecting directly from a local PC or laptop. The Ethernet
interface default IP address is 192.168.200.1.
Through the Ethernet management port, the following variables can be configured or
m
onitored:
• Pa
ssword: The password used to login to the console (1-10 characters).
• Circ
uit ID: The circuit ID communicated to other units via EOC (1-64 charac-
ters). EOC (Embedded Operations Channel) is an out-of-band channel specified
i
n the G.991.2 standard for SHDSL.
• Da
ta Rate: The DSL data rate is set by specifying the number of 64k timeslots.
• A
nnex: Either G.991.2 Annex A or Annex B.
The following status information is available through the command line interface:
• Co
nfiguration Mode: Whether the LB510A-R2 is configured by DIP switches or
software.
• DSL Link State: In Progress, Success, Deactivated, or Idle.
ON OFF OFF ON ON OFF OFF 4992
ON OFF OFF ON ON OFF ON 5056
ON OFF OFF ON ON ON OFF 5120
ON OFF OFF ON ON ON ON
5184
ON OFF ON OFF OFF OFF OFF 5248
ON OFF ON OFF OFF OFF ON 5312
ON OFF ON OFF OFF ON OFF 5376
ON OFF ON OFF OFF ON ON 5440
ON OFF ON OFF ON OFF OFF 5504
ON OFF ON OFF ON OFF ON
5568
ON OFF ON OFF ON ON OFF 5632
ON OFF ON OFF ON ON ON 5696
S4-2 S4-3 S4-4 S4-5 S4-6 S4-7 S4-8 Data Rate (kbps)