Black Box LB510A-R2 Switch User Manual


 
724-746-5500 | blackbox.com
Page 9
In accordance with the requirements of council
directive 2002/96/EC on Waste of Electrical and
Electronic Equipment (WEEE), ensure that at
end-of-life you separate this product from other
waste and scrap and deliver to the WEEE col-
lection system in your country for recycling.
This device contains no user serviceable parts.
This device can only be repaired by qualified
service personnel.
This device is NOT intended nor approved for
connection to the PSTN. It is intended only for
connection to customer premise equipment.
Electrostatic Discharge (ESD) can damage
equipment and impair electrical circuitry. It
occurs when electronic printed circuit cards are
improperly handled and can result in complete
or intermittent failures. Do the following to pre-
vent ESD:
• Always follow ESD prevention procedures
when removing and replacing cards.
• Wear an ESD-preventive wrist strap, ensuring
that it makes good skin contact. Connect the
clip to an unpainted surface of the chassis
frame to safely channel unwanted ESD voltages
to ground.
• To properly guard against ESD damage and
shocks, the wrist strap and cord must operate
effectively. If no wrist strap is available, ground
yourself by touching the metal part of the chas-
sis.
WARNING
WARNING
WARNING