Filter
Top Products
Table 6-1. V.25 bis Autodialer Commands.
COMMAND FUNCTION
CIC Connect incoming call.
CRN n Call request—dial number (n) entered on DTE
keyboard.
CRS m Call request—dial number stored in specified
memory address (m).
DIC Disregard incoming call.
PRN m n Program normal—store number or dial string n in
memory address m.
RHA Switch to Hayes dialing mode (also resets modem
configuration).
RLN Request list of all stored numbers.
RLN m Request to see number stored at address m.
n — represents a number to be dialed or stored (e.g., 5557979).
m — represents a memory address where a number is stored (0-9).
A comma ( , ) can be included in a dial string to effect a pause.
A colon ( : ) can be included to instruct the autodialer to wait for a dial tone
before proceeding.
110
Modem 34336