Filter
Top Products
29
3.0 Modem Setup Options
NOTE
If you have selected a Quick Setup or have changed certain options
settings, pressing the ENT pushbutton to exit the SETUP menu will
cause the modem to reset.
3.2.2 H
OW
T
O
S
ELECT
O
PTIONS
Options are configured from the SETUP menu.
To access the SETUP menu, press the right-arrow pushbutton at
page 1 of the MAIN MENU. This will take you to page 2 of the MAIN MENU.
Press push button 1 to select SETUP.
The SETUP menu has six screens. Use the arrow pushbuttons until the
option you wish to configure is displayed on the bottom line of the LCD
window. Select the option you wish to configure by pressing the pushbutton
that corresponds to the number on the front panel.
When you select an option, the option flashes on the LCD. The option will
not take effect until you leave the SETUP menu. Simply accessing an option
screen does not change the option, so not hesitate to move through the
various LCD screens in the SETUP menu.
Note the following points:
• Selected options do not become active until you leave the SETUP menu.
• Changing some options causes the modem to automatically reset.
• The options you select are automatically saved by the Modem when
you leave the SETUP menu.
1. DEC/INC (Decrease/Increase) Screens. Several option screens show
the abbreviations DEC and INC on the bottom line of the LCD display. The
abbreviations mean the numerical value shown on the top line (e.g., a stored
phone number) can be changed. Selecting DEC (pushbutton 1) decreases
the value; selecting INC (pushbutton 3) increases it.
Front panel LCD
SETUP <1>
TYPE LINE SPEED
12
3