Filter
Top Products
MINI/MICRO?
Defines the type of printer.
MINI Is for a printer with a Cutter Assembly (factory default)
MICRO Is for a printer without a Cutter Assembly
PRINT SPEED?
Controls the speed the ticket travels at. Also effects the print quality.
The numbers range from 0 - FASTEST to 7 - SLOWEST. 3 is factory default.
DIAGNOSTIC MODE?
Please consult your Programming Guide
Your choices are YES or NO. NO is factory default.
TICKET TYPE?
Defines how the optos are configured on the paper guide assembly.
NORMAL
Both optos are inline with each other (usually mounted on a black bracket
)
ATM
Feed opto is mounted under the thermal head and cut opto is attached to the cutter
assembly.
LABEL
Same as ATM but the cut opto is a see through type.
SPECIAL TICKET
This option is for a printer with a ticket load switch.
(factory default)
STATUS ENABLED?
Sets status response protocols.
Here are the following choices:
TRANSPARENT MODE?
Please consult your Programming Guide
Your choices are YES (Enabled) or NO (Disabled). YES is factory default.
PAPER MODE?
Is generally used only for test purposes. It may also be used on roll stock with no
black marks on the ticket.
Your choices are YES (Enabled) or NO (Disabled). NO is factory default.
HEAD DPI?
Defines thermal head dpi (dots per inch)
Your choices are 200 or 300. 300 is factory default.
11
NONE Disables the XON/XOFF and status response protocols
SERIAL Enables the XON/XOFF and status response protocol for the serial port (factory default)
PARALLEL Enables bi-directional parallel statusresponses if printer is configured as bi-directional.
SER/PAR Enablesb both bi-directional parallel and serial status responses
USB Enables USB status responses
USB/SER Enables USB and serial status responses
USB/PAR Enables USB and bi-directional parallel
USB/SER/PAR Enables USB, bi-directional parallel and serial status responses