Filter
Top Products
This self test is actually comprised of four individual test
features.
1. The initial self test prints 15 labels at speed “A” (2" per sec-
ond) then automatically PAUSES the printer. Each time the
PAUSE key is pressed, an additional 15 labels print out.
2. While the printer is PAUSED, pressing the CANCEL key once
alters the self test. Now each time the PAUSE key is pressed the
printer prints 15 labels at speed “D” (6" per second).
3. While the printer is PAUSED, pressing the CANCEL key a sec-
ond time alters the self test again. Now, each time the PAUSE
key is pressed the printer prints 50 labels at speed “A”.
4. While the printer is PAUSED, pressing the CANCEL key
once alters the self test a third time. Now, each time the
PAUSE key is pressed the printer prints 50 labels at speed “D”.
Note: On printers with either the rewind or peel option installed,
the Peel Mode is activated during the first half (steps 1–4)
of the PAUSE Key Self Test. On printers with a rewind
option, the rewind plate must be removed for proper
function of the peel sensors during the test. The first label
to print will say, “PEEL OPTION INSTALLED”. Each
label must be manually removed from the sensor path
before the next label will print. Steps 1–4 will then be
repeated in Rewind Mode.
3-8