Filter
Top Products
20
To fax from memory
Your PaperJet 55E has a memory which lets
you store one document for sending at a
pre-set time.
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
Display shows
TX FROM MEMORY
The document is scanned into the memory.
Display shows
STORING
then
TYPE TIME
HH:MM
Enter the time at which you want your fax
to be sent, e.g.
18.30 or press the Start
button to select the current time.
Display shows
TYPE FAX NUMBER
Use the keypad to dial the number you
want.
Display shows
TYPE FAX NUMBER
. If
required, enter the second number to which
you want to send your fax and press the
Start button again.
Repeat the last step until you have entered
all the numbers you want up to a maximum
of 10 when the display will show
END OF
LIST
.
After entering your last number press
Start
again to confirm. Display shows
TX SET
then
AUTOMATIC RX
(or current receive
mode) and
MEMORY TX
.
To broadcast a document
You can set your machine to send a document to up
10 different numbers (broadcasting).
See “To fax from memory” below.
If using the 12 hour clock, press the Function
button to switch between a for
AM
and p for
PM
.
Press the < > buttons to move the cursor.
To change, re-send or cancel a stored
document
When you have stored a document in the
memory for sending later:
Display shows
AUTOMATIC RX
MEMORY TX
Display shows
TX FROM MEMORY
Display shows
ALREADY ENTERED
Display shows
PRINT SETTING?
Press to switch between this and the other
two options
CHANGE PARAM?
or
CANCEL
SETTING?
Press to select the option displayed.
PRINT – you get a print out of the fax
details and then the machine returns to
standby.
/
/