Filter
Top Products
37
Connecting to a switchboard
You can store the access code required to get an
outside line so that you only have to press the
EXTERNAL button.
With some switchboards you may also need to switch
your PaperJet 55E from TONE dialling to PULSE
dialling. Check with your switchboard manager or
supplier to see if this is necessary.
To set the dialling mode and access
number
While your PaperJet 55E is in standby mode
Press the
Function button until the display
shows
INSTALLATION
Display shows
TEL.LINE SET-UP
Display shows
PUBL. LINE (PSTN)
Press until the display shows
PRIV. LINE
(PBX)
Display shows
PBX DIAL: TONE
Press to switch between
TONE
and
PULSE
.
Press to confirm. Display shows
EXT. LINE: PREFIX
Press buttons to display the options:
FLASH
or
PREFIX
. If your access code is
recall choose
FLASH
. If your access code is a
digit(s) choose
PREFIX
.
Press
Start to confirm your choice.
If you select
PREFIX
you are asked for the
code needed to get an outside line via your
switchboard (max. three digits).
Enter your code.
To confirm.
Display shows
PSTN DIAL: TONE
Press to switch between
TONE
and
PULSE
settings to suit your switchboard.
To confirm.
To return to standby.
/