Filter
Top Products
Setting up
13
Date and time
It is important that your DECTfax is always set
to the correct date and time as this information
is shown on the fax received by the addressee
and is required for faxes programmed to be
sent at a later date.
To set the date and time
1 Switch on your BT DECTfax.
The display shows CHECK DATE.
2 Press Function then 2 then 1 then Start.
The display shows the current set date
and time.
3 Use the keypad to enter the date and time.
For example, for 7th May 1998, 9:15, press
07 05 98 09 15.
4 Press Start to confirm the entry.
Entering your own telephone/fax number
Your telephone/fax number can be printed at
the top of each fax you send.
To enter your own telephone/fax number
1 Press Function then 2 then 2. The display
shows 22--NUMBER. Press
Start.
2 Use the keypad to enter your own number.
To enter a space, use the
ᮣ button; to enter
a +, use the ✱ button.
3 Press Start to confirm the entry.
Entering your name
You can add your name (such as the name of
your company) to be printed at the top of each
fax you send.
To enter your name
1 Press Function then 2 then 3. The display
shows 23--NAME. Press
Start.
2 Enter your name using the keypad to type in
letters. Press the button which has the letter
you want until that letter shows up on the
display. For example, to enter the letter R
press the
7 button four times - first it will
show 7, then P, then Q, then R. To move on to
the next letter you want to enter, press the
ᮣ
A
B
C
2
A
B
C
2
A
B
C
2
1
A
B
C
2
D
E
F
3