Filter
Top Products
Setting up
15
To set the ring melody
1 Press Function then 2 then 7. The display
shows 27--RING MELODY. Press
Start. You
will hear the current ringing tone.
2 Use the ᮣ button to select and hear the next
tone. You can also select WITHOUT RING to
have no tone at all - the
TEL icon will flash
instead.
3 Use the + and - buttons to select the volume.
There are 4 levels.
4 Press Start to confirm your choices.
Setting the receive mode
You can use the Tel Fax mode button to set
the machine to receive faxes manually or
automatically. There are three receive modes,
the default setting is
Fax.
• Press the Tel Fax button to switch between
the different receive modes.
Tel mode
When set to Tel mode, the display shows:
All calls must be answered manually. If the call
is a fax (you will hear beeps from the other fax
machine), wait a few seconds and the
basestation will automatically switch to fax
receive mode. If it does not, press # then
7 on
your handset to activate fax receive mode.
Tel/Fax mode
When set to Tel/Fax mode, the display shows:
Your DECTfax will automatically determine
whether an incoming call is a phone call or a
fax call.
Fax mode
When set to Fax mode, the display shows:
In fax mode calls will be answered automatically,
in fax receive mode, after the number of rings
set (factory setting: 4 rings).
Your DECTfax machine is now fully set
up for use. To make any changes to your
settings, simply repeat the procedures.
A
B
C
2
P
Q
R
S
7