Filter
Top Products
Setting up
14
Your BT DECTfax has two dialling modes:
TONE and PULSE. It is preset to TONE . This is
the correct setting for all direct lines and most
switchboards. For some switchboards it may
be necessary to set the machine to
PULSE
dialling.
To set the dial mode
1 Press Function then 2 then 5. The display
shows 25--DIALLING. Press
Start.
2 Press the ᮣ button to select the mode you
want.
3 Press Start to confirm the entry.
Ring settings
To set the number of rings before the
machine answers automatically
1 Press Function then 2 then 6. The display
shows 26--NB OF RINGS.Press
Start.
2 Use the keypad to enter the number you
require.
3 Press Start to confirm the entry.
button. You can enter a maximum of 20
characters.
3 Press Start to confirm the entry.
Network and dial settings
Your BT DECTfax has been preset to work on
a direct exchange line, or PSTN. There is no
need to alter this setting unless you will be
using the machine on an internal network, or
PABX. If this is the case:
To change the network setting
1 Press Function then 2 then 4. The display
shows 24--NETWORK. Press
Start.
2 Press the ᮣ button to scroll through the
options.
3 Press Start to confirm the entry.
To enter the characters / or - or + use the 1 button
on the keypad.
To delete a character use the < button.
To insert a space use the > button.
A
B
C
2
G
H
I
4
A
B
C
2
J
K
L
5
A
B
C
2
M
N
O
6